Frame: '09 GT dirt/street design, main tubes and stays cr-mo, Mid size BB shell, machined headtube, small 5mmT. Dropouts, seat stay mounted U-brake
Size: 20" wheel / 20.5" top tube
Forks: '08 GT dirt/street design, full cr-mo, small dropouts,1-1/8" x 25.4mm steerer, 1-1/4" O.D. blades
Cranks: GT Tubular Cr-Mo 3pc., thread-in chianwheel pin, 8 spline, single bolt clamping, 175mm / '07 design 33T steel GT design
Bottom Bracket: Mid size ball type with 8 spline Cr-Mo axle
Freewheel: 12T cassette
Chain: KMC Z510
Rear Brake: Tektro, 907-A, coil spring, melt forged aluminium U-brake
Front Brake: Alloy side-pull caliper
Levers: Tektro, 274A, aluminium
Bars: '07 GT dirt/street dual radius bend, Cr-mo, 7" rise
Stem: GT FS design, cold forged aluminium, machined GT logo
Headset: Tange Seiki FATTY 22, extra deep cup engagement, 1-1/8" threadless
Grips: GT Wing shroom design
Rear Hub: GT branded cassette hub, sealed Mech. bearins, 14mm Cr-Mo axle, 36 hole, 12T cog
Front Hub: '05 GT branded, aluminium body, sealed Mech. bearings, 3/8" Cr-Mo axle, 32 hole
Rims: Alienation PBR, aluminium, 32 hole front, 36 hole rear, 31mm width
Tyres: Front: Kenda K-Rad 2.125" Rear: Kenda Konxsion 2.1"
Seat: '09 GT Slim mini street design, 8mm rails
Seatpost: aluminium double bolt micro adjust
Seatclamp: '08 GT CNC mini design
Pedals: '05 GT Dirt/Street platform design, aluminium body, cr-mo alxe
Colour: Semi Gloss Purple
+ had the font brake taken off
Attached File(s)
-
22042009_001_.jpg (424.93K)
Number of downloads: 48
This post has been edited by Eddie_bmx: 23 April 2009 - 08:18 AM
Help















